BLUESENSE TRM RESET GENERATOR
BLUESENSE TRM RESET DRIVER

In an emergency situation (defective or empty main battery) or in case of higher power consumption the two batteries (main & auxiliary) may be connected together by activating the link button (red LED manually linked is on) After a lapse of time of 30 minutes (or immediately after activating the auto button), the system returns to the automatic mode.

BLUESENSE TRM RESET GENERATOR

With the additional charge by solar equipment, battery charger or generator is sufficient for charging, the starter battery will be charged automatically with auxiliary battery together (green LED 'link' lights). Appliances as fridges, lights, compressors, inverters are now safely fed from the auxiliary battery. If the engine is stopped, the two batteries will be disconnected automatically with some delay.

While the engine is running the main and auxiliary batteries are linked together for parallel charging from the alternator (green LED linked is on). Green: <14.0V: Save charge mode, no damage to batteries. Red: >14.5V: High loading of batteries, may be present at cold ambient temp. This function is called by pressing the display button for about 30 seconds. The LED’s show the energy level if all loads are switched off:ġ1.0V = flashing and beeping indicates low battery situation Green: Batteries are in the safe working range Includes a manual link for 30 and 120 minutes with automatic return.ĭisplay of Battery Voltage (Energy Level) The system offers low battery alarm on both batteries and a link failure alarm.

BLUESENSE TRM RESET DRIVER

The battery monitor is installed in the vehicle (dash) and informs the driver about the charge level of both batteries, the charging voltage from the alternator or an additionally installed solar system and the relay link status. The kit includes a 4.7m wiring loom with sealed automotive plug, battery and crimp terminals for easy installation. This manual linking function (called load sharing) is very helpful for jump starting or when using high current appliances such as an electrical recovery winch, power inverter or compressor. For emergency situations all systems are equipped with the manual override function (link). All systems are equipped with a 200A power relay. This fully automatic Swiss made Microprocessor Controlled Dual Battery Management System separates the starter battery from auxiliary battery if the vehicle has stopped and links them while the car is running. Separates the starter battery from auxiliary battery if the vehicle has stopped and links them while the car is running.

Bluesense trm reset